t7600

DELL T7600 Workstation

The Dell Precision T7600 is a workstation featuring an EATX motherboard with dual LGA 2011 Sockets. These only currently support the E5-2600 first generation processors, but it has the same chipset as the T7610 which received support for the second generation processors so it seems they may soon get support if Dell puts out a BIOS update. The system has 16 DDR3 slots with support for up to 16GB RDIMMs or 32GB LRDIMMs. The T7610 received support for 64GB LRDIMMs so it seems that if the T7600 does get the update for the second generation E5 processors then the 64GB LRDIMM support may come with that update as well. The workstation features 4 hot-swappable bays that can easily accommodate either 3.5" or 2.5" drives of either SAS/SATA. The system comes standard with a PERC H310 RAID controller to handle the hardware RAID configuration.

The Precision T7600 has 5 PCIe slots available if you are only utilizing a one-processor configuration but adds two more PCIe slots if you add in a second processor. All slots are full-height, full-width, but the first and the third slot under the processors only operate at x4 speed instead of the full x16. The workstation features dual gigabit networking ports with Intel adapters: 82574L and 82579LM. The maximum capacity of a single processor configuration with RDIMMs is 128GB and with LRDIMMs 256GB. In a dual processor configuration, the maximum addressable capacity is 256GB with RDIMMs and 512GB with LRDIMMs.  Maximum single stick capacity is 16GB RDIMMs or 32GB LRDIMMs.

The Precision T7600 has a few known issues that have been addressed with BIOS updates:

Revision A07 fixed several major issues including:

- Non-bootable SAS drive/RAID when LSI 9265 is installed - Hang during POST when two K5000 cards are installed. 5. - RAID ONE BSOD issue.

Revision A04 Fixed an issue with the diagnostic LEDs

For additional info on this product visit https://www.itconnected.tech/support/dell/dell-precision-t7600.html