IT Connected

The Dell PowerEdge R220 is a 1U rackmount server which comes in a single processor configuration. It can address up to 32GB (8GB X 4) of DDR3 UDIMMs with a max frequency of 1600 MHz. The processors that this system support includes all of the E3-1200 V3 and Haswell-based Celeron, Pentium, and i3's series. The R220 can be configured with up to 2 3.5" or 2 2.5" Hard Drives This system has 1 available expansion slot.

The R220 can be equipped with a single 250W power supply. In a configuration with a E3-1281 v3, 4 8GB DDR3 UDIMMs, dual 400GB Intel DC S3700 drives you can expect idle power consumption to be roughly 34.30 watts. This will cost roughly $30.54 for a full year of idling with the national average cost of $.10/KWh. At full load you can expect power consumption of roughly 119 watts. It would cost roughly $105.96 to run the system at full load continuously for a year.

The Dell PowerEdge R530 is a 2U rackmount server which can come in a dual or single processor configuration. In a dual processor configuration, it can address up to 768GB (32GB X 24) of DDR4 RDIMMs with a max frequency of 2400 MHz. In triple channel configuration, the maximum is reduced to 1866 MHz. In a single processor configuration the maximum capacity is halved.

The processors that this system support includes all of the E5-2600 v3 and E5-2600 v4 series but in order to support the V4 series the system must come installed or be flashed with BIOS Revision 2.0 or newer. The R530 can be configured with up to 8 3.5" or 8 2.5" Hard Drives This system has 5 available expansion slots. With stock configuration you are limited to low profile, half-height expansion cards, but an expansion card is available that will allow you to install one full-height, full-length expansion card and one full-height, half-length card instead of attaching into motherboard slots 1 and 2 which are both low-profile and half-length.

The R530 can be equipped with up to 2 redundant 450W to 1100W power supplies. In a configuration with 2 E5-2650 v3 processors, 12 8GB DDR4 RDIMMs, dual 300GB 15K drives and redundant 750W power supplies you can expect idle power consumption to be roughly 161 watts. This will cost roughly $140.10 for a full year of idling with the national average cost of $.10/KWh. At full load you can expect power consumption of roughly 346 watts. It would cost roughly $308.08 to run the system at full load continuously for a year.

The Dell PowerEdge R430 is a 1U rackmount server which can come in a dual or single processor configuration. In a dual processor configuration, it can address up to 384GB (32GB X 12) of DDR4 RDIMMs with a max frequency of 2400 MHz. In triple channel configuration, the maximum is reduced to 1866 MHz. The R430 can address up to 768GB (64GB X 12) of DDR4 LRDIMMs with a maximum frequency of 2400 MHz. In triple channel configuration, the maximum frequency is reduced to 2133MHz. In a single processor configuration for both RDIMMs and LRDIMMs the only difference is the maximum capacity is halved.

The processors that this system support includes all of the E5-2600 v3 and E5-2600 v4 series but in order to support the V4 series the system must come installed or be flashed with BIOS Revision 2.0 or newer. The R430 can be configured with up to 4 3.5" or 10 2.5" Hard Drives This system has 2 available expansion slots with the correct risers. One riser is available that has two half-height, half-length x16 slots and another riser is available with one full-height, half-length and one low-profile, half-length slots. Both at x8 link speed.

The R430 can be equipped with up to 2 redundant 550W Platinum or 450W Bronze power supplies. In a configuration with 2 E5-2650 v3 processors, 12 8GB DDR4 RDIMMs, dual 300GB 15K drives and redundant 550W power supplies you can expect idle power consumption to be roughly 162 watts. This will cost roughly $140.97 for a full year of idling with the national average cost of $.10/KWh. At full load you can expect power consumption of roughly 364 watts. It would cost roughly $324.11 to run the system at full load continuously for a year.

The Dell PowerEdge R330 is a 1U rackmount server which can be equipped with a single processor. It can address up to 64GB (16GB X 4) of DDR4 UDIMMs with a max frequency of 2400 MHz. The processors that this system support includes all of the E3 1200 v5, Intel E3-1200 v6, Intel Core i3 6100 series, Intel Celeron G3900 & G3930, Intel Pentium G4500 & G4600. The R330 can be installed with 8 x 2.5-inch hard drive/SSD's. This system has 2 available expansion slots. With an expansion riser installed it can accomodate one full-height and one half-height PCIe slot. They operate at x4 and x8 respectively. Without the expansion riser the system can only accommodate one x4 low profile half height PCIe card.

The R330 can be equipped with up to 2 redundant 350W power supplies. In a configuration with 1 E3-1220 v5 processors, 4 8GB DDR4 UDIMMs, dual 300GB 10K drives and redundant 350W power supplies you can expect idle power consumption to be roughly 86 watts. This will cost roughly $74.83 for a full year of idling with the national average cost of $.10/KWh. At full load you can expect power consumption of roughly 134 watts. It would cost roughly $119.31 to run the system at full load continuously for a year.

The Dell PowerEdge R730XD is a 2U rackmount server which can come in a dual or single processor configuration. In a dual processor configuration, it can address up to 1536GB (64GB X 24) of DDR4 RDIMMs with a max frequency of 2400 MHz. In triple channel configuration, the maximum is reduced to 1866 MHz. The R730xd can address up to 3072GB (128GB X 24) of DDR4 LRDIMMs with a maximum frequency of 2400 MHz. In triple channel configuration, the maximum frequency is reduced to 2133MHz. In a single processor configuration for both RDIMMs and LRDIMMs the only difference is the maximum capacity is halved.

The processors that this system support includes all of the E5-2600 v3 and E5-2600 v4 series but in order to support the V4 series the system must come installed or be flashed with BIOS Revision 2.0 or newer. The R730xd Can come in 24 x 2.5-inch hard drive/SSD chassis, 12 x 3.5-inch hard drive, or 8 x 3.5-inch hard drive and 18 x 1.8-inch SSD configurations. This system has 7 available expansion slots with the correct risers. Many are low profile or half height.

The R730xd can be equipped with up to 2 redundant 495W to 1100W power supplies. In a configuration with 2 E5-2650 v3 processors, 24 8GB DDR4 RDIMMs, dual 300GB 15K drives and redundant 750W power supplies you can expect idle power consumption to be roughly 155 watts. This will cost roughly $134.88 for a full year of idling with the national average cost of $.10/KWh. At full load you can expect power consumption of roughly 344 watts. It would cost roughly $306.30 to run the system at full load continuously for a year.