IT Connected

The Dell PowerEdge R720 is a 2U rackmount server which can come in a dual or single processor configuration. In a dual processor configuration, it can address up to 1536GB (64GB X 24) of DDR3 LRDIMMs with a max frequency of 1866 MHz. In triple channel configuration, the maximum is reduced to 1333 MHz. The R720 can address up to 768GB (32GB X 24) of DDR3 RDIMMs with a maximum frequency of 1866 MHz. In triple channel configuration, the maximum frequency is reduced to 1333MHz. This system can also address UDIMMs but only two DIMMs may be installed per channel so you are limited to 16 DIMMs. It can address up to 8GB DDR3 UDIMMs for a total of 128GB at a maximum operating frequency of 1600MHz. In a single processor configuration for RDIMMs, LRDIMMs and UDIMMs the only difference is the maximum capacity is halved.

The processors that this system support includes all of the E5-2600 v1 and E5-2600 v2 series but in order to support the V2 series the system must come installed or be flashed with BIOS Revision 2.0 or newer. The R720 has up to 16 2.5" drive bays. This system has 7 available expansion slots with the correct risers installed. A riser may be installed to have additional room for a graphics card.

The R720 can be equipped with up to 2 redundant 495W to 1100W power supplies. In a configuration with 2 E5-2650 v2 processors, 24 8GB DDR3 RDIMMs, dual 300GB 15K drives and redundant 750W power supplies you can expect idle power consumption to be roughly 97 watts. This will cost roughly $84.41 for a full year of idling with the national average cost of $.10/KWh. At full load you can expect power consumption of roughly 293 watts. It would cost roughly $260.89 to run the system at full load continuously for a year.

The Dell PowerEdge R620 is a 1U rackmount server which can come in a dual or single processor configuration. In a dual processor configuration, it can address up to 1536GB (64GB X 24) of DDR3 LRDIMMs with a max frequency of 1866 MHz. In triple channel configuration, the maximum is reduced to 1333 MHz. The R620 can address up to 768GB (32GB X 24) of DDR3 RDIMMs with a maximum frequency of 1866 MHz. In triple channel configuration, the maximum frequency is reduced to 1333MHz. This system can also address UDIMMs but only two DIMMs may be installed per channel so you are limited to 16 DIMMs. It can address up to 8GB DDR3 UDIMMs for a total of 128GB at a maximum operating frequency of 1600MHz. In a single processor configuration for RDIMMs, LRDIMMs and UDIMMs the only difference is the maximum capacity is halved.

The processors that this system support includes all of the E5-2600 v1 and E5-2600 v2 series but in order to support the V2 series the system must come installed or be flashed with BIOS Revision 2.0 or newer. The R620 has up to 10 2.5" drive bays. This system has 2 available expansion slots with the correct risers. Many are low profile or half height.

The R620 can be equipped with up to 2 redundant 495W to 1100W power supplies. In a configuration with 2 E5-2650 v2 processors, 24 8GB DDR3 RDIMMs, dual 300GB 15K drives and redundant 750W power supplies you can expect idle power consumption to be roughly 98 watts. This will cost roughly $85.28 for a full year of idling with the national average cost of $.10/KWh. At full load you can expect power consumption of roughly 311 watts. It would cost roughly $276.92 to run the system at full load continuously for a year.

The Dell PowerEdge R420 is a 1U rackmount server which comes in single or dual processor configurations. It can address up to 384GB (32GB X 12) of DDR3 RDIMMs with a max frequency of 1600 MHz or 48GB UDIMMs with a max frequency of 1600MHz. The processors that this system support includes all of the Intel Xeon One E5-1400, E5-2400, or E5-2400 v2 processors series. The R420 can be configured with up to 4 3.5" or 8 2.5" drives This system has 2 available expansion slots with the correct risers. The first slot is full-height, low profile at x16 link while the second is full-height, low profile at x16 link speed when dual processors are installed. When a single processor is installed the first slot runs at x4 speed.

The R420 can be equipped with a up to dual redundant 350W or 550W power supply. In a configuration with two E5-2400 v2, 12 16GB DDR3 RDIMMs at 1600MHz, two 300GB 15K drives and dual 550W power supplies you can expect idle power consumption to be roughly 97 watts. This will cost roughly $86.37 for a full year of idling with the national average cost of $.10/KWh. At full load you can expect power consumption of roughly 183 watts. It would cost roughly $162.95 to run the system at full load continuously for a year.

The Dell PowerEdge R320 is a 1U rackmount server which comes in a single processor configuration. It can address up to 192GB (32GB X 6) of DDR3 RDIMMs with a max frequency of 1600 MHz or 24GB UDIMMs with a max frequency of 1600MHz. The processors that this system support includes all of the Intel Xeon One E5-1400, E5-2400, or E5-2400 v2 processors series. The R320 can be configured with up to 8 3.5" or 2.5" drives This system has 2 available expansion slots with the correct risers. The first slot is half-height, half-length at x4 link while the second is full-height, half-length at x16 link speed.

The R320 can be equipped with a up to dual redundant 350W power supply. In a configuration with a E5-2400 v2, 6 16GB DDR3 RDIMMs at 1600MHz, single 300GB 15K drives you can expect idle power consumption to be roughly 75 watts. This will cost roughly $66.78 for a full year of idling with the national average cost of $.10/KWh. At full load you can expect power consumption of roughly 118 watts. It would cost roughly $105.07 to run the system at full load continuously for a year.

The Dell PowerEdge R230 is a 1U rackmount server which comes in a single processor configuration. It can address up to 64GB (16GB X 4) of DDR4 UDIMMs with a max frequency of 2400 MHz. BIOS Revision 2.0.8 is required to reach this max frequency. The processors that this system support includes all of the Intel Xeon E3-1200 v5 processor, E3-1200 V6, Intel Core i3 6100, Intel Celeron G3900, Intel Celeron G3930, Intel Pentium G4500, Intel Pentium G4600's series. The R230 can be configured with up to 4 3.5" or 4 2.5" drives This system has 2 available expansion slots with the correct riser. With the x16 riser there are two x16 slots available with slot one being half-height, half-length and the second slot being full-height, half-length. With the x8 riser the first slot is full-height, half-length at x4 speed while the second slot is half-height, half-length at x8 speed.

The R230 can be equipped with a single 250W power supply. In a configuration with a E3-1220 v5, 4 16GB DDR4 UDIMMs at 2400MHz, dual 1TB 7.2K drives you can expect idle power consumption to be roughly 100 watts. This will cost roughly $89.04 for a full year of idling with the national average cost of $.10/KWh. At full load you can expect power consumption of roughly 150 watts. It would cost roughly $133.56 to run the system at full load continuously for a year.