E5-2600 v3

The HPE Proliant Dl60 G9 is a 1U rackmount server which can come in a dual or single processor configuration. In a dual processor configuration, it can address up to 1TB of LRDIMMs(8 X 128GB) or 256GB of RDIMMs(8 X 32GB) with a maximum frequency of 2400MHz with a V4 processor or 2133MHz with a V3 processor. This server's processors options include the entire E5-2600 v3/v4 and E5-1600 v3/v4 lineup, but the E5-2600 v4's require BIOS revision 2.00 so it is worthwhile to double check before you try to install E5-2600 v4 processors. The E5-1600 v3/v4 series processors are limited to single processor configurations and the E5-1600 V4 requires BIOS revision 2.20 or newer in order to be addressed. Storage wise it can be equipped with up to 12 LFF 3.5" drives when configured without an optical drive or 8 LFF 3.5" drives when configured with an optical drive and it features up to 6 PCIe expansion slots with the correct risers. The base model comes with a 550W power supply but can be upgraded with a redundant 900W configuration.

You can expect for the system to consume 138.73 Watts at idle with a dual E5-2650 v3 configuration with 8 sticks of 32GB DDR4 RDIMM's, 12 300GB 15K SAS drives and the standard 550W power supply. At the national average of 10 cents per Kilowatt-hour it will cost roughly $121 to idle for one year. At full-load it is expected to take 449.39 watts and will cost roughly $394 to run for a full year.

The HPE Proliant Dl60 G9 is a 1U rackmount server which can come in a dual or single processor configuration. In a dual processor configuration, it can address up to 1TB of LRDIMMs(8 X 128GB) or 256GB of RDIMMs(8 X 32GB) with a maximum frequency of 2400MHz with a V4 processor or 2133MHz with a V3 processor. This server's processors options include the entire E5-2600 v3/v4 and E5-1600 v3/v4 lineup, but the E5-2600 v4's require BIOS revision 2.00 so it is worthwhile to double check before you try to install E5-2600 v4 processors. The E5-1600 v3/v4 series processors are limited to single processor configurations and the E5-1600 V4 requires BIOS revision 2.20 or newer in order to be addressed. Storage wise it can be equipped with up to 4 LFF 3.5" Drives and it features up to 3 PCIe expansion slots with the correct risers. The base model comes with a 550W power supply but can be upgraded with a redundant 900W configuration.

You can expect for the system to consume 71 Watts at idle with a dual E5-2650 v3 configuration with 8 sticks of 32GB DDR4 RDIMM's, 4 300GB 15K SAS drives and the standard 550W power supply. At the national average of 10 cents per Kilowatt-hour it will cost roughly $62 to idle for one year. At full-load it is expected to take 368.76 watts and will cost roughly $323 to run for a full year.

The Dell Precision T7910 is a workstation featuring an EATX motherboard with Dual LGA2011-3 sockets. This server supports Xeon E5-2600 v3 in dual processor configurations and Xeon E5-1600 v3 in single processor configurations. If the BIOS revision is A12 or newer then it will also support dual Xeon E5-2600 v4's or a single Xeon E5-1600 v4. This workstation uses a C612 chipset. It features 16 DIMM slots and can accept DDR4 LRDIMMs up to 64GB/stick for a total of 1TB in a dual processor configuration or RDIMMs up to 32GB/stick or a total of 512GB in a dual processor configuration. With a single processor configuration that number is halved. This may eventually be increased to officially support 128GB LRDIMMs but that has not been confirmed yet.

The T7910 features 6 x16 width PCIe slots and one PCI slot. The top two PCIe slots are linked to processor 1 and the bottom 5 slots are linked to processor 0. This means that if you do not have a second processor in then the top PCIe slots will not be operational.

This workstation can house 4 hot swappable 3.5" drives in the front or up to 8 2.5" drives. The processor socket is square ILM if you are looking for a heatsink replacement.

For additional information on this model please visit https://www.itconnected.tech/support/dell/dell-precision-t7910.html